|
|
Set of 12 needle files in snapshut plastic wallet with hanging hole. One of each of the following Hand, flat, half round, round, three square, square, crossing, knife, barrette, slitting, round edge joint and marking files, with... |
|
GBP113.80
More Information
|
|
|
A set of 2 ergo handled files for comfort and gripsuitable for homeowners. Both files are 8in in length.1 for wood 1 side bastard rasp, 1 side double second cut.1 for metal 1 side bastard double cut, 1 side ... |
|
GBP23.95
More Information
|
|
|
Sets of five 10 inch engineers files complete with handles and a plastic roll up wallet with tie. Contains one of each hand bastard, hand second, square bastard, half round bastard, round bastard.... |
|
GBP63.68
More Information
|
|
|
5 piece engineers 8in file set containing 1 of each 100 08 02 flat second cut file.170 08 02 triangular second cut file.210 08 02 half round second cut file.230 08 02 round second cut file. 343 08 02 half round ... |
|
GBP58.99
More Information
|
|
|
Set of 6 needle files in snapshut plastic wallet with hanging hole. 1 of each of the following Hand, flat, half round, round, three square and square, with handle included.For fine filing and polishing jobs.Used ... |
|
GBP54.52
More Information
|
|
|
Smooth single cut teeth for sharpening round hooded chain saw teeth.Safe point and special tooth construction for rapid cutting.Length 150mm 6in.Diameter 18in.... |
|
GBP2.30
More Information
|
|
|
Smooth single cut teeth for sharpening round hooded chain saw teeth.Safe point and special tooth construction for rapid cutting.Length 200mm 8in.Diameter 316in.... |
|
GBP2.30
More Information
|
|
|
Smooth single cut teeth for sharpening round hooded chain saw teeth.Safe point and special tooth construction for rapid cutting.Length 200mm 8in.Diameter 532in.... |
|
GBP2.30
More Information
|
|
|
Smooth single cut teeth for sharpening round hooded chain saw teeth.Safe point and special tooth construction for rapid cutting.Length 200mm 8in.Diameter 732in.... |
|
GBP2.30
More Information
|
|
|
Triangular, untanged, edges tapering towards both ends. The surfaces and edges single cut from both points towards the centre.Wooden handle included.For sharpening saws with 60deg angle.No tang but tapered at each end and... |
|
GBP7.44
More Information
|
|
|
Double ended saw file for general purpose saw sharpening with both ends having second cut teeth. Single cut teeth on all sides. Fitted with an Ergo type handle.Size 150mm 6in.Side 14in.... |
|
GBP11.54
More Information
|
|
|
Double ended saw file for general purpose saw sharpening with both ends having second cut teeth. Single cut teeth on all sides. Fitted with an Ergo type handle.Size 180mm 7in.Side 14in.... |
|
GBP9.70
More Information
|
|
|
Double ended saw file for general purpose saw sharpening with both ends having second cut teeth. Single cut teeth on all sides. Fitted with an Ergo type handle.Size 200mm 8in.Size 932in.... |
|
GBP12.43
More Information
|
|
|
Triangular, with edges tapering towards the point. Surfaces and edges single cut.For sharpening all types of saw with fine cross toothing.Second cut.Size 4in.Type extra slim taper saw file.... |
|
GBP5.91
More Information
|
|
|
Triangular, with edges tapering towards the point. Surfaces and edges single cut.For sharpening all types of saw with fine cross toothing.Second cut.Width figures indicate the largest width of the file section. |
|
GBP6.39
More Information
|
|
|
Suitable for use on ferrous and non ferrous metals, plastics, laminates and hard woods. The parallel file FM10 has milled teeth one side shear cut the other curved teeth. ... |
|
GBP22.95
More Information
|
|
|
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily.Slightly tapered in width and thickness. Suitable for general work on iron and st... |
|
GBP9.53
More Information
|
|
|
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily.Slightly tapered in width and thickness. Suitable for general work on iron and st... |
|
GBP13.03
More Information
|
|
|
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily.Slightly tapered in width and thickness. Suitable for general work on iron and st... |
|
GBP18.64
More Information
|
|
|
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily.Slightly tapered in width and thickness. Suitable for general work on iron and st... |
|
GBP5.21
More Information
|
