|
|
Replacement plastic case for the SNAPFLIPSET.Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.... |
|
GBP5.68
More Information
|
|
|
Storage case for the Snappy Forstners.DimensionsCarry casePlease note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding... |
|
GBP8.70
More Information
|
|
|
Replacement plastic case for the SNAPSE1SET.Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.... |
|
GBP4.80
More Information
|
|
|
Snappy shank 50mm long ball end hex bits. For use with both socket head cap and countersunk machine screws.DimensionsampquotTo suit 2mm, 2.5mm and 3mm AF for M3, M4 and M5 socket screws.ampquotPlease note that prices in the Trend Catalogue ... |
|
GBP14.36
More Information
|
|
|
Snappy shank 50mm long ball end hex bits. For use with both socket head cap and countersunk machine screws.DimensionsampquotTo suit 4mm, 5mm and 6mm AF for M6, M8 and M10 cap screws M10 CSK headampquotPlease note that prices in the Trend ... |
|
GBP14.36
More Information
|
|
|
Snappy shank 50mm long ball end hex bits. For use with both socket head cap and countersunk machine screws.DimensionsTo suit 7mm and 8mm AF for M10 cap head and M12Please note that prices in the Trend Catalogue download, if show... |
|
GBP14.36
More Information
|
|
|
The HSS drill bit is gripped by a spring steel collet into the hex shaft.The hex shanks snap into the Quick Chuck.DimensionsDiameter 116 inchShank Diameter 14 inch HexPlease note that prices in the Trend Catalogue dow... |
|
GBP4.16
More Information
|
|
|
Replacement snappy drill bit for the SNAPDBG12DimensionsDiameter 4.36mm 1164 inchScrew sizeNo.12Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed... |
|
GBP5.29
More Information
|
|
|
The HSS drill bit is gripped by a spring steel collet into the hex shaft.The hex shanks snap into the Quick Chuck.DimensionsDiameter 14 inchShank Diameter 14 inch HexPlease note that prices in the Trend Catalogue down... |
|
GBP4.92
More Information
|
|
|
The HSS drill bit is gripped by a spring steel collet into the hex shaft.The hex shanks snap into the Quick Chuck.DimensionsDiameter 18 inchShank Diameter 14 inch HexPlease note that prices in the Trend Catalogue down... |
|
GBP4.16
More Information
|
|
|
Pack of 10 spare drills to suit the drill countersinks. Supplied in a storage tube.DimensionsDiameter18 inchDiameter3.2 mmPlease note that prices in the Trend Catalogue download, if shown below, may differ to the website p... |
|
GBP13.89
More Information
|
|
|
The HSS drill bit is gripped by a spring steel collet into the hex shaft.The hex shanks snap into the Quick Chuck.DimensionsDiameter 1.0mmShank Diameter 14 inch HexPlease note that prices in the Trend Catalogue downloa... |
|
GBP4.16
More Information
|
|
|
Replacement tapered point drill.DimensionsDiameter 2.0mmPlease note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding ... |
|
GBP1.76
More Information
|
|
|
Replacement tapered point drill.DimensionsDiameter 2.4mmPlease note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding ... |
|
GBP1.76
More Information
|
|
|
Extra long magnetic holder for 25mm insert bits. Quick and easy to use and saves time when trying to remove awkward and hard to reach screwsDimensions6 inch 152mm OLBody diameter 9.4mmPlease note that prices in the Tren... |
|
GBP11.86
More Information
|
|
|
Extra long magnetic holder for 25mm insert bits. Quick and easy to use and saves time when trying to remove awkward and hard to reach screws.Dimensions11 inch 278mm OLBody diameter 9.4mmPlease note that prices in the Tr... |
|
GBP14.49
More Information
|
|
|
A pack of ten 25mm No. 1 Phillips 25mm insert bits Titanium nitride coating TiN coated.They have a round shaft to reduce breakage giving excellent torque transmission, high resistance to Cam Out coming out of screw headand extended life time.... |
|
GBP7.56
More Information
|
|
|
A pack of ten 25mm No. 2 Phillips 25mm insert bits Titanium nitride coating TiN coated.They have a round shaft to reduce breakage giving excellent torque transmission, high resistance to Cam Out coming out of screw headand extended life time.... |
|
GBP7.56
More Information
|
|
|
A pack of ten 25mm No. 3 Phillips 25mm insert bits Titanium nitride coating TiN coated.They have a round shaft to reduce breakage giving excellent torque transmission, high resistance to Cam Out coming out of screw headand extended life time.... |
|
GBP7.56
More Information
|
|
|
A pack of ten 25mm No. 1 Pozi iquest 25mm insert bits Titanium nitride coating TiN coated.They have a round shaft to reduce breakage giving excellent torque transmission, high resistance to Cam Out coming out of screw headand extended life time. |
|
GBP7.56
More Information
|
